Order Products : sales@su-jiao.com
Kepital® FT2020
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Korea Engineering Plastics Co., Ltd |
| Trademark: | Kepital® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wc5d0X_Kepital-FT2020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A medium-low viscosity grade for general injection molding. It was reinforced with whisker, and so suitable for parts requiring much higher stiffness, dimensional accuracy and low warpage. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.59 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) | |||
| 190°C/2.16 kg | 15 | g/10 min | ASTM D1238 |
| -- | 15 | g/10 min | ISO 1133 |
| Molding Shrinkage | |||
| Flow : 2.00 mm | 0.80 | % | ASTM D955 |
| 3.00 mm | 0.90 | % | |
| Water Absorption (24 hr) | 0.23 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, 23°C | 85.0 | MPa | ASTM D638 |
| Yield, 23°C | 86.0 | MPa | ISO 527-2 |
| Tensile Elongation (Break, 23°C) | 4.0 | % | ASTM D638 |
| Nominal Tensile Strain at Break | 2.7 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 7010 | MPa | ASTM D790 |
| 23°C | 6800 | MPa | ISO 178 |
| Flexural Strength | |||
| 23°C | 142 | MPa | ASTM D790 |
| 23°C | 146 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.6 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact (3.20 mm) | 44 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 160 | °C | ASTM D648 |
| Peak Melting Temperature | 165 | °C | ASTM D3418 |
| CLTE - Flow (20 to 80°C) | 6.0E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | ASTM D257, IEC 60093 |
| Volume Resistivity | 1.0E+14 | ohms·cm | ASTM D257, IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEETEC LDPE BF315 | LG Chem Ltd. | LDPE | SEETEC LDPE |
| BCC Resins BC 4553 | BCC Products Inc. | Polyester, TS | BCC Resins |
| Alathon® M5370WC | LyondellBasell Industries | HDPE Copolymer | Alathon® |
| Algoflon® L600 | Solvay Specialty Polymers | PTFE | Algoflon® |
| GAPEX® RPP20EU84AL | Ferro Corporation | PP, Unspecified | GAPEX® |
