Order Products : sales@su-jiao.com

Europrene® N 3330

Category:	NBR , Acrylonitrile Butadiene Rubber
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wTohFq_Europrene-N-3330.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® N 3330 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3330 is characterised by good processability, good mineral oil resistance, and medium flexibility at low temperature. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Wide range of oil resistant technical articles obtained by injection moulding.

Message

Europrene® N 3330 is a cold polymerized acrylonitrile-butadiene copolymer made at the Porto Torres production facility in Italy. A non staining antioxidant is added during the production process.

Europrene® N 3330 is characterised by good processability, good mineral oil resistance, and medium flexibility at low temperature. The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process.

Wide range of oil resistant technical articles obtained by injection moulding.

General Information
Additive	Antioxidant
Features	Antioxidant Good Processability Low Temperature Flexibility Oil Resistant
Appearance	Yellow
Forms	Bale
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 100°C)	30	MU	ASTM D1646
Acrylonitrile Content	33.0	wt%	ASTM D3533
Ash Content	< 0.5	wt%	ASTM D5667
Organic Acid	< 0.5	wt%	ASTM D5774
Soap	< 0.6	wt%	ASTM D5774
Volatile Matter	< 1.0	wt%	ASTM D5668

Resin Grade	Manufacturer	Category	Trademark
Silamid® SV50	Roonamid a.s.	Nylon 6	Silamid®
Sylvin 2912-57 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
VENYL SW502H - 8229	AD majoris	Nylon 6	VENYL
Witcom PEI 3L1	Witcom Engineering Plastics B.V.	PEI	Witcom PEI
KOPLA PC KBP1000	KOPLA Co., Ltd.	PBT	KOPLA PC