Order Products : sales@su-jiao.com
UBE Polyethylene J5019
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wTMU18_UBE-Polyethylene-J5019.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UBE Polyethylene J5019 is a Polyethylene material. It is available in North America for injection molding. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 8.00 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 250 | % | ASTM D638 |
| Apparent Bending Modulus | 110 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -30.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 78.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sizzle™ GPPS | Plastic Selection Group, Inc. | PS (GPPS) | Sizzle™ |
| AEI SX408:CM401 | AEI Compounds Limited | LDPE | AEI |
| ADENE NCZE | A.D. Compound spa | PP Homopolymer | ADENE |
| KOPA® KN333G30HSBL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| Hyundai EP PPF HT310 | HYUNDAI EP Co., Ltd. | PP Homopolymer | Hyundai EP PPF |
