Order Products : sales@su-jiao.com
Lucent PA L6-140
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Lucent Polymers, Inc. |
| Trademark: | Lucent PA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wRecl3_Lucent-PA-L6-140.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
15% Glass/25% Mineral Renforced Nylon 6 Colors Available Add "H" for Heat Stabilized Add "HU" for Weatherable Typical Properties, Dry as Molded |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.40 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 100 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.0 | % | ASTM D638 |
| Flexural Modulus | 6210 | MPa | ASTM D790 |
| Flexural Strength | 152 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 194 | °C | ASTM D648 |
| Peak Melting Temperature | 216 to 225 | °C | ASTM D789 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vyncolit® X 28057-2HT | Vyncolit N.V. | Epoxy | Vyncolit® |
| DENKA ABS GR-2030G | Denka Company Limited | ABS | DENKA ABS |
| DURANEX® 7407 | Polyplastics Co., Ltd. | PC+PBT | DURANEX® |
| Okirol® E-5F | DIOKI d.d. | PS (EPS) | Okirol® |
| Ingeo™ 3D860 | NatureWorks® LLC | PLA | Ingeo™ |
