Order Products : sales@su-jiao.com
Wah Hong UP WH-81TM
| Category: | Polyester Alloy , Polyester Alloy |
| Manufacturer: | Wah Hong Industrial Corp. |
| Trademark: | Wah Hong UP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wQYWfB_Wah-Hong-UP-WH-81TM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dry BMC material is Wah Hong Thermoset Plastic, which separate to UP & DAP two types. UP & DAP molding compounds with the excellent properties of moldability, dimemsional stability, electric characteristics, mechanical strength, and heat resistance. Especially, the dry molding compounds pellet can be widely applied in the injection products such as electronics, automobile parts, and household electric appliances. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.92 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.32 to 0.37 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | < 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 12700 to 13700 | MPa | ASTM D790 |
| Flexural Strength | 108 to 118 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 49 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 265 | °C | ASTM D648 |
| CLTE - Flow | 3.0E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | ASTM D257 | ||
| -- 1 | 1.0E+13 to 1.0E+14 | ohms·cm | |
| -- 2 | 1.0E+14 to 1.0E+15 | ohms·cm | |
| Dielectric Strength | 30 to 33 | kV/mm | ASTM D149 |
| Arc Resistance | 180 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | > 600 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Boiling |
| 2 . | Normal |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BMNO P10 | Arkema | Nylon 11 | Rilsan® |
| TEKNILID TXPPE-2 | Tekni-Films, a div of Tekni-Plex | Film, Coated Al Foil | TEKNILID |
| ASI POLYETHYLENE LP 554-01 | A. Schulman Inc. | HDPE | ASI POLYETHYLENE |
| EPIMIX PBT/PET GV0 30 NC | EPSAN Plastik SAN. ve TiC. A.S. | PBT+PET | EPIMIX |
| Plaslube® J-4/35/TF/15 NAT | Techmer Engineered Solutions | Nylon 612 | Plaslube® |
