Order Products : sales@su-jiao.com
Polypropylene DLGF9411.00
| Category: | TPO , Experimental Compounded Polypropylene |
| Manufacturer: | Trinseo |
| Trademark: | Polypropylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wPy6tC_Polypropylene-DLGF9411-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DLGF9400.00 is a 40% long glass fiber reinforced grade with good flow properties. The glass fibres (12 mm length) are coupled to the polypropylene matrix resulting in high stifness and strength. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792, ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 9000 | MPa | ASTM D638, ISO 527-2 |
| Tensile Strength | |||
| Yield, Injection Molded 1 | 135 | MPa | ASTM D638 |
| Yield, Injection Molded | 135 | MPa | ISO 527-2/50 |
| Tensile Elongation | |||
| Break, Injection Molded 2 | 2.2 | % | ASTM D638 |
| Break, Injection Molded | 2.2 | % | ISO 527-2/50 |
| Flexural Modulus | |||
| Injection Molded 3 | 9250 | MPa | ASTM D790 |
| Injection Molded 4 | 9250 | MPa | ISO 178 |
| Flexural Strength (Injection Molded) | 200 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (Injection Molded) | 35 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (Injection Molded) | 55 | kJ/m² | ISO 179/1fU |
| Multi-Axial Instrumented Impact Energy (23°C, 3.00 mm, Injection Molded, Ductile Failure) | 15.0 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 160 | °C | ASTM D648, ISO 75-2/A |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | Method I (3 point load) |
| 4 . | 3-point load |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E PVC GA-509 | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E PVC |
| Wondel® A AH0 | Nanjing Julong Engineering Plastics Co., LTD | Nylon 66 | Wondel® A |
| Xydar® MG-850 | Solvay Specialty Polymers | LCP | Xydar® |
| Sylvin 8205-75UV Brown 7468 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Braskem PE HD3000N | Braskem IDESA | HDPE | Braskem PE |
