Order Products : sales@su-jiao.com
Gallonprene® GP520-4012
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wM3M7a_Gallonprene-GP520-4012.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP520-4012 is a thermoplastic elastomer (TPE) product,. It is available in Africa and the Middle East, Latin America or Asia Pacific. Typical application areas are: engineering/industrial accessories. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 5.00 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 550 | % | ASTM D412 |
| Injection instructions |
|---|
| Overmolding Parameters:Rear Temperature: 170 to 190°CCenter Temperature: 180 to 200°CFront Temperature: 190 to 210°CMelt Temperature: 160 to 180°CMold Temperature: 30 to 60°CProcessing Temperature Limit: 260°CInjection Pressure: HighInjection Speed: HighBack Pressure: 20 to 50% |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAZMID B 150 FV10 EV20 | Mazzaferro Indústria e Comércio de Polímeros e Fibras Ltda. | Nylon 6 | MAZMID B |
| Stat-Tech™ NN-20CF/000 SO1 | PolyOne Corporation | Nylon 66 | Stat-Tech™ |
| Unipren® Elastomers B3 NTLA010 35A UP308 | Petropol Industry and Trade of Polymers LTDA | PP+EPDM | Unipren® Elastomers |
| NuSil CV-2566 | NuSil Technology | Silicone | NuSil |
| EpoxAcast® 670 HT | Smooth-On, Inc | Epoxy | EpoxAcast® |
