Order Products : sales@su-jiao.com
Badaflex® TPE-S 30D 1517 UV
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wHCmP9_Badaflex-TPE-S-30D-1517-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermoplastic Elastomer as a standard injection moulding grade based on SEBS Copolymer with improved UV resistance |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 30 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 14.5 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 600 | % | ISO 37 |
| Compression Set | DIN 53515 | ||
| 23°C, 72 hr | 40 | % | |
| 70°C, 24 hr | 60 | % | |
| 100°C, 24 hr | 80 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 53.0 | kN/m | DIN 53515 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 220 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NOVALAST® 6001 | NOVA Polymers, Inc. | TPV | NOVALAST® |
| EverGlide® MB3450 | Polymer Dynamix | SAN | EverGlide® |
| ELIX™ ABS H604 | ELIX Polymers, S. L. | ABS | ELIX™ ABS |
| Latamid 66 H2 G/25 | LATI S.p.A. | Nylon 66 | Latamid |
| Plexiglas® Diffuse V045-68193 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
