Order Products : sales@su-jiao.com
Halene P M365
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wGgHoa_Halene-P-M365.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
M365 is a heterophasic Polypropylene Impact Copolymer (PPICP), produced by Spheripol II - process Technology. This PPICP is a reactor grade & contains nucleating agent. This is primarily suitable for Compounding & Injection Molding process. M365 combines excellent processability with high melt flow, low cycle time, excellent impact - stiffness balance, low warpage and good gloss. M365 is suitable for food contact applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 65 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1200 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 60 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 135 | °C | ASTM D1525 2 |
| Injection instructions |
|---|
| Barrel Temperature: 160 - 250 °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4850 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Ravamid® R210 GF 25 | Ravago Group | Nylon 66 | Ravamid® |
| Alpha PVC GM 8000-95C NATURAL LCF | AlphaGary | PVC, Unspecified | Alpha PVC |
| FARALLOY® PP-155 | O'Neil Color and Compounding | PP, Unspecified | FARALLOY® |
| Hypro® PPH-T30 | Entec Polymers | PP Homopolymer | Hypro® |
