Order Products : sales@su-jiao.com
Radilon® S LHS 105 M NAT
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Radici Plastics |
| Trademark: | Radilon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wAOBgc_Radilon-S-LHS-105-M-NAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PA6 low viscosity injection moulding grade. Nucleated, fast cycling. High flowability. Natural colour. Suitable for moulding of high productivity items. ISO 1043 : PA6 |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| UL File Number |
|
| Appearance |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.14 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C, 2.00 mm | 11 | -- | % | |
| Equilibrium, 23°C, 2.00 mm, 50% RH | 2.7 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 3300 | 1200 | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Yield) | 80.0 | 45.0 | MPa | ISO 527-2/1A/50 |
| Tensile Strain (Yield) | 4.0 | 30 | % | ISO 527-2/1A/50 |
| Nominal Tensile Strain at Break | 20 | > 50 | % | ISO 527-2/1A/50 |
| Flexural Modulus 1 | 2900 | -- | MPa | ISO 178 |
| Flexural Stress 2 | 110 | -- | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 4.0 | -- | kJ/m² | |
| 23°C | 5.5 | 10 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 170 | -- | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed | 60.0 | -- | °C | ISO 75-2/Af |
| Vicat Softening Temperature | 190 | -- | °C | ISO 306/B50 |
| Melting Temperature 3 | 220 | -- | °C | ISO 11357 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Rate | 0.0 | -- | mm/min | FMVSS 302 |
| Flame Rating (0.800 mm) | V-2 | -- | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | |||
| 1.00 mm | 750 | -- | °C | |
| 2.00 mm | 700 | -- | °C | |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | |||
| 1.00 mm | 775 | -- | °C | |
| 2.00 mm | 725 | -- | °C |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 80.0 | °C | |
| Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
| Dew Point - Desiccant Dryer | < -20.0 | °C | |
| Suggested Max Moisture | 0.15 | % | |
| Processing (Melt) Temp | 250 to 280 | °C | |
| Mold Temperature | 70.0 to 80.0 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene FRP257-00 | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| RheTech Polypropylene GC20P100-00UV | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| DOW™ LLDPE MP 1888 Copolymer | The Dow Chemical Company | LLDPE | DOW™ LLDPE |
| Aurora PVC AP2254 Series | Aurora Plastics, Inc. | PVC, Unspecified | Aurora PVC |
| Epoxies, Ect. 20-2390 | Epoxies, Etc. | PUR, Unspecified | Epoxies, Ect. |
