Order Products : sales@su-jiao.com
Kumho KTR KTR 103
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Korea Kumho Petrochemical Co., Ltd. |
| Trademark: | Kumho KTR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | w9I29K_Kumho-KTR-KTR-103.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KUMHO KTR ® 103 polymer is a linear block copolymer based on styrene and butadiene with bound styrene of 31.5% mass. It is supplied as a physical form of porous pellets. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | < 1.0 | g/10 min | |
| Ash Content | 0.1 | wt% | |
| Oil Content | 0.0 | wt% | |
| Solution Viscosity 1(25°C) | 2.0 | Pa·s | |
| Styrene Content | 31.5 | wt% | |
| Volatile Matter | 0.50 | wt% |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 75 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (300% Strain) | 3.24 | MPa | |
| Tensile Strength (Break) | 25.5 | MPa | |
| Tensile Elongation (Break) | 740 | % |
| Note Message | |
|---|---|
| 1 . | 25 wt% in toluene |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MIPELON™ XM-221U | Mitsui Chemicals America, Inc. | UHMWPE | MIPELON™ |
| Toler PE PE5962 | Toler Chemical, Inc | HDPE | Toler PE |
| Calprene® 501 | Dynasol Elastomers | SBS | Calprene® |
| Fluon® LM-ETFE 740AP | Asahi Glass Co., Ltd. | ETFE | Fluon® |
| Iupital® FC2020H | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
