Order Products : sales@su-jiao.com

THERMOLAST® V TV5LVN (Series: LTP)

Category:	SEPS , Styrene Ethylene Propylene Styrene Block Copolymer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® V
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	w3GAID_THERMOLAST-V-TV5LVN-Series-LTP-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The LTP Series is your material solution for sealings requiring high temperature resistance. The compounds are characterized by an excellent adhesion to PP.

Typical applications

Fastenings

Grommets

Seals

Material advantages

Adhesion to PP

Excellent heat resistance up to 140 °C

Excellent hysteresis behaviour

Excellent mechanical properties

Exceptional long-term compression set

General Information
Features	Good Adhesion High Heat Resistance
Uses	Fasteners Grommets Seals
Appearance	Natural Color
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.05	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	50		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	4.00	MPa	ISO 37
Tensile Elongation ²(Break)	400	%	ISO 37
Tear Strength ³	12	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	12	%
70°C, 24 hr	33	%
100°C, 24 hr	43	%
120°C, 24 hr	45	%

Injection	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Rear Temperature	180	°C
Middle Temperature	200	°C
Front Temperature	220	°C
Mold Temperature	25.0 to 40.0	°C
Injection Pressure	20.0 to 100	MPa
Back Pressure	2.00 to 10.0	MPa

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
STERLENE™ HMU210	R&P (Pte.) Ltd.	TPO (POE)	STERLENE™
AVP™ KLL10FR	SABIC Innovative Plastics	PC	AVP™
DuPure® TT 79 V	Ducor Petrochemicals BV	PP Impact Copolymer	DuPure®
GELAST 1165	Guang Sung Plastics (GSPL)	TPV	GELAST
Huafon T23H	Huafon Group Co., Ltd.	Nylon 66	Huafon