Order Products : sales@su-jiao.com

ICORENE® 3979

Category:	mHDPE , Metallocene High Density Polyethylene
Manufacturer:	ICO Polymers APAC, A Division of A. Schulman
Trademark:	ICORENE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	w3BfLw_ICORENE-3979.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
ICORENE™ 2018 is a low density polyethylene resin that is suitable for both carpet backing and binding of fibre and non-wovens. The high melt flow of this grade results in improved flow and ease of processing. ICORENE™ 2018 is available as a natural powder in a range of grind specifications to suit the application.

General Information
Features	Fast Molding Cycle Food Contact Acceptable Good Surface Finish Good UV Resistance High Flow High Hardness High Impact Resistance High Rigidity Low Warpage
Uses	Tanks Water Sports Equipment Wheels
Appearance	Colors Available
Forms	Powder
Processing Method	Rotational Molding

Physical	Nominal Value	Unit	Test Method
Density	0.947	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.5	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal)	80.0	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	20.4	MPa	ASTM D638
Tensile Elongation ²(Break)	620	%	ASTM D638
Flexural Modulus	870	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Impact Strength (-40°C, 3.20 mm)	102	J	ARM

Additional Information	Nominal Value	Unit	Test Method
UV Rating ³	8000	hr	ASTM 2565

Note Message
1 .	50 mm/min
2 .	50 mm/min
3 .	50% Retained Tensile Elongation

Resin Grade	Manufacturer	Category	Trademark
RTP 2187	RTP Company	PEI	RTP
Radilon® S 35HR 100 NAT	Radici Plastics	Nylon 6	Radilon®
LNP™ LUBRILOY™ UA200A compound	SABIC Innovative Plastics	PPA	LNP™ LUBRILOY™
POLIMAXX KU901	IRPC Public Company Limited	ABS	POLIMAXX
Sarlink® TPE ME-2380B BLK	Teknor Apex Company	TPE	Sarlink® TPE