Order Products : sales@su-jiao.com
Plenco 07321 (Transfer)
| Category: | Phenolic , Phenolic |
| Manufacturer: | Plastics Engineering Co. |
| Trademark: | Plenco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | w0ba9e_Plenco-07321-Transfer-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PLENCO 07321 is an organic fiber reinforced phenolic molding compound, offering improved mechanical strength and excellent dimensional stability. Type ASTM 5948 CFI-5, and UL recognized under component file E40654. 07321 is available in black. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Agency Ratings |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Apparent Density | 0.47 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow | 0.91 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.37 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (E-Scale) | 76 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6850 | MPa | ASTM D638 |
| Tensile Strength | 43.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 0.70 | % | ASTM D638 |
| Flexural Modulus | 6740 | MPa | ASTM D790 |
| Flexural Strength | 67.0 | MPa | ASTM D790 |
| Compressive Strength | 179 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 29.1 | J/m | ASTM D256 |
| Notched Izod Impact | 28 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 163 | °C | ASTM D648 |
| Continuous Use Temperature | 187 | °C | ASTM D794 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.7E+11 | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | 8.3 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 5.30 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.074 | ASTM D150 | |
| Arc Resistance | 133 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | 150 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.29%Drop Ball Impact, PLENCO Method: 312 J/m |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 165 - 182 | °C | |
| Back Pressure | 0.300 | MPa | |
| Screw Speed | < 60 | rpm |
| Injection instructions |
|---|
| Transfer Time: 3-8 secTransfer Pressure: 5.5-6.9 MPaPreheating Temperature: 104-115°C |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WONDERLITE® PC-115U | CHI MEI CORPORATION | PC | WONDERLITE® |
| Bergamid™ B70 G60 H BK037 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Daelim Po1y® LD-01 | DAELIM INDUSTRIAL CO., LTD. | LDPE | Daelim Po1y® |
| Escorene™ Ultra UL 8705 Series | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| PLUSTEK RA300G3 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
