Order Products : sales@su-jiao.com

Baytec® WP-260

Category:	PUR-Ether/MDI , Polyurethane (Polyether, MDI)
Manufacturer:	Covestro - PUR
Trademark:	Baytec®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	w0KgYv_Baytec-WP-260.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Baytec WP-260 dicyclohexylmethane diisocyanate (HMDI)-terminated polyether prepolymer is based on polypropylene ether glycol (PPG). It is used in the formulation of two-component elastomer and binder systems. Polyurethanes from Baytec WP-260 prepolymer can be made optically clear, light-stable, and weather-resistant. They can range from rigid to flexible depending on the coreactant used. Typical uses include tooling resins, potting and encapsulation, and decorative applications. The material 's low viscosity allows for easy production of complex parts with good surface definition. As with any product, use of the Baytec WP-260 prepolymer in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.

Message

Baytec WP-260 dicyclohexylmethane diisocyanate (HMDI)-terminated polyether prepolymer is based on polypropylene ether glycol (PPG). It is used in the formulation of two-component elastomer and binder systems. Polyurethanes from Baytec WP-260 prepolymer can be made optically clear, light-stable, and weather-resistant. They can range from rigid to flexible depending on the coreactant used. Typical uses include tooling resins, potting and encapsulation, and decorative applications. The material 's low viscosity allows for easy production of complex parts with good surface definition. As with any product, use of the Baytec WP-260 prepolymer in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.

General Information
Forms	Liquid

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore D)	80		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	58.4	MPa	ASTM D412
Tensile Elongation (Break)	7.4	%	ASTM D412
Tear Strength ¹	49.9	kN/m	ASTM D624

Impact	Nominal Value	Unit	Test Method
Dart Drop Impact	8.47	J	ASTM D3029

Additional Information
Appearance: Colorless to yellow liquidSpecific Gravity @ 25°C: 1.08Viscosity @25°C: 280 mPaFlash Point, PMCC: 187°CNCO: 25.8 to 27.0 wt%

Note Message
1 .	C mould

Resin Grade	Manufacturer	Category	Trademark
RTP 200 TFE 18 SI 2 HB	RTP Company	Nylon 66	RTP
TECHNYL® A 208F BLACK 21 N	Solvay Engineering Plastics	Nylon 66	TECHNYL® A
KPOL-LDPE LD K-0.30/921	KPOL Chem Co.	LDPE	KPOL-LDPE
MAJORIS ET360 - 8229	AD majoris	PP, Unspecified	MAJORIS
RTP ESD 1487 N	RTP Company	PESU	RTP