Order Products : sales@su-jiao.com
SABIC® PP 86MF10
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vtxH8L_SABIC-PP-86MF10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A grade which is characterized by an optimum combination of stiffness, impact resistance and flow. This grade is also available in a UV-stabilized version. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 230°C/2.16 kg | 4.7 | g/10 min | ISO 1133 |
| 230°C/5.0 kg | 18 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/50 | ||
| Yield, 2.00mm | 25.0 | MPa | ISO 527-2/50 |
| Fracture, 2.00mm | 28.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break, 2.00 mm) | 500 | % | ISO 527-2/50 |
| Flexural Modulus 1 | 1130 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -40°C | No Break | ISO 179 | |
| 23°C | No Break | ISO 179 | |
| Notched Izod Impact | ISO 180/A | ||
| -40°C | 4.5 | kJ/m² | ISO 180/A |
| -20°C | 6.8 | kJ/m² | ISO 180/A |
| 0°C | 14 | kJ/m² | ISO 180/A |
| 23°C | No Break | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 80.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 140 | °C | ISO 306/A50 |
| CLTE - Flow | 1.3E-4 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| Mold Shrinkage, SABIC Method: 1.6% |
| Note Message | |
|---|---|
| 1 . | Method I (three-point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 2800 | RTP Company | TPO (POE) | RTP |
| ANSALAC A09 000 0000 V0 | Daloga srl | ABS | ANSALAC |
| Dryflex® SE 90A201 | ELASTO | TPE | Dryflex® |
| Sylvin 3210-85 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Ultramid® B3GK24 BK00564 | BASF Corporation | Nylon 6 | Ultramid® |
