Order Products : sales@su-jiao.com
KRATON® D1162 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vtD6z0_KRATON-D1162-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1162 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied from North America in the physical form identified below.
Kraton D1162 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 45 | g/10 min | ASTM D1238 |
| Antioxidant Additive | 0.080 to 0.30 | % | Internal Method |
| Polystyrene Content | 40 to 46 | % | Internal Method |
| Solution Viscosity - Toluene, 25%w (25°C) | 100 to 140 | mPa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYSTONE® D black EL | Röchling Engineering Plastics SE & Co. KG | HMWPE | POLYSTONE® |
| Sanren F200A (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| TAISOX 2214 | Formosa Plastics Corporation | LLDPE | TAISOX |
| TITANPRO® PM655 | Lotte Chemical Titan (M) Sdn. Bhd. | PP Homopolymer | TITANPRO® |
| Latiohm 66-10 H2 CNT CE/10 | LATI S.p.A. | Nylon 66 | Latiohm |
