Order Products : sales@su-jiao.com
CERTENE鈩?PHS-1
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vt9ThT_CERTENE-PHS-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PHS-1 is a certified prime grade Polypropylene specially designed for EXTRUSION of Water-Quench Cast Film for Slit Tape applications. PHS-1 combines excellent processability, very good thermal stability, and high degree of purity with Low Water Carry-over and good balance of tape strength and orientation properties. PST-1 applications include stretched tapes for textile Tape & Raffia uses, such as strapping tape, woven industrial sacks, carpet backing, tarpaulins and geotextiles. Recommended processing temperatures of PHS-1 are: 1) tape - 210° to 220°C in barrel and 230-250°C in head, and 2) multifilament - 210° to 230°C. PHS-1 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.3 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 101 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 33.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-5°C, 81.3 mm, Injection Molded) | 27 | J/m | ASTM D256A |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Processing Temperature | |||
| Multifilaments | 210 to 230 | °C | |
| Tape 4 | 210 to 220 | °C | |
| Tape 5 | 230 to 250 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| 4 . | Barrel |
| 5 . | Head |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BF23RD6464 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Hapflex™ 791-5 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| Paracril® BLT M80 | INSA | NBR | Paracril® |
| EvoSource™ ABS 4535 70/35 | MBA Polymers Austria Kunststoffverarbeitung GmbH | ABS | EvoSource™ |
| VALOX™ 420SE0 resin | SABIC Innovative Plastics | PBT | VALOX™ |
