Order Products : sales@su-jiao.com
TAIRILOY AC2300
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Formosa Plastics Corporation |
| Trademark: | TAIRILOY |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vsgH0B_TAIRILOY-AC2300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FCFC PC/ABS resin AC2300 meets the requirements of UL, SGS and the certificates of environmental protection. |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| UL File Number |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.12 | g/cm³ | ASTM D792 |
| 23°C | 1.12 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (240°C/5.0 kg) | 9.0 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage - Flow (3.20 mm) | 0.40 - 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| Class R, 23°C | 110 | ASTM D785 | |
| R scale, 23°C | 110 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 49.0 | MPa | ASTM D638, ISO 527-2 |
| Flexural Modulus (23°C) | 2550 | MPa | ASTM D790, ISO 178 |
| Flexural Strength (23°C) | 81.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C, 3.18 mm) | 490 | J/m | ISO 180, ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm) | 92.0 | °C | ASTM D648, ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, All Colors) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 95.0 - 105 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Hopper Temperature | 60.0 - 80.0 | °C | |
| Rear Temperature | 210 - 240 | °C | |
| Middle Temperature | 230 - 260 | °C | |
| Front Temperature | 230 - 260 | °C | |
| Processing (Melt) Temp | 240 - 260 | °C | |
| Mold Temperature | 70.0 - 90.0 | °C | |
| Back Pressure | 0.345 - 0.689 | MPa |
| Injection instructions |
|---|
| Die Temperature: 220 to 250°CInjection Volume: 30 to 80% of injection machine's capacity |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GB 30 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Sylvin 2945-70 Clear 8382 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| EpoxAcoat® Red | Smooth-On, Inc | Epoxy | EpoxAcoat® |
| Epoxies, Ect. 10-3784 | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| HiFill® PBT 0182 B BK | Techmer Engineered Solutions | PBT | HiFill® |
