Veromor® Purge -XT

Category:	Proprietary , Proprietary
Manufacturer:	PlastxWorld Inc.
Trademark:	Veromor® Purge
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vpNvr4_Veromor-Purge--XT.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PlastxWorld has introduced the exceptional range of Veromor® Purge products to the European and US markets. The products provide a highly cost effective way to make rapid changeovers between colors and materials. Shutdown of equipment can now be achieved in minutes whilst ensuring a clean machine ready for startup. The products are in a concentrated format and are designed to be let down in polymer. They are non-chemical, non-toxic and non-abrasive, yet they scrub your equipment clean without danger to your operators or your equipment. Veromor® Purge is a scrubbing additive type of purge compound. It can be added to base polymers that will provide a mechanical scrubbing of the screw and barrel. The suggested add rate of Veromor® Purge is 20%. Veromor® Purge -XT is for purging conventional injection molders. Packaged in 10 kg (22 lb) boxes.

General Information
Features	Non-toxic
Uses	Cleaning compound
Forms	Particle
Processing Method	Injection molding

Injection instructions
Veromor® Purge Processing ProcedureMix 20% Veromor® Purge with medium flow HDPE, polypropylene or the polymer you plan to process next.Starve screw & barrel.Temperature: Purge between 200-300°C. Lower temperatures can be used. Ensure carrying polymer will flow through equipment at the lower temperatures. Polymer will be stiffer when mixed with Veromor® PurgeRPM: You do not need to adjust the RPM in most cases prior to purging.It is recommended that the amp meter be observed to ensure purge is flowing satisfactorily through the barrel.Add Veromor® Purge polymer/purge mix to hopper & process through equipment.For Injection molding:Add 1 - 2 kg (2.2 - 4.4 lb) of Veromor® Purge -XT polymer/purge mix for every 25 mm (1 inch) barrel diameter. If openings smaller than 1.5mm use Veromor® Purge -XS.Flush out Veromor® Purge with polymer you plan to process next.Note:If the screw & barrel have very bad carbonization, increase amount of Veromor® Purge processed through the barrel.Veromor® Purge can be used at higher addition level, must not exceed 35%.Veromor® Purge -XT is not suitable for hot runner systems.

Injection instructions

Veromor® Purge Processing ProcedureMix 20% Veromor® Purge with medium flow HDPE, polypropylene or the polymer you plan to process next.Starve screw & barrel.Temperature: Purge between 200-300°C. Lower temperatures can be used. Ensure carrying polymer will flow through equipment at the lower temperatures. Polymer will be stiffer when mixed with Veromor® PurgeRPM: You do not need to adjust the RPM in most cases prior to purging.It is recommended that the amp meter be observed to ensure purge is flowing satisfactorily through the barrel.Add Veromor® Purge polymer/purge mix to hopper & process through equipment.For Injection molding:Add 1 - 2 kg (2.2 - 4.4 lb) of Veromor® Purge -XT polymer/purge mix for every 25 mm (1 inch) barrel diameter. If openings smaller than 1.5mm use Veromor® Purge -XS.Flush out Veromor® Purge with polymer you plan to process next.Note:If the screw & barrel have very bad carbonization, increase amount of Veromor® Purge processed through the barrel.Veromor® Purge can be used at higher addition level, must not exceed 35%.Veromor® Purge -XT is not suitable for hot runner systems.

Resin Grade	Manufacturer	Category	Trademark
TECHNYL® A R 218 V30 BLACK	Solvay Engineering Plastics	Nylon 66	TECHNYL® A
AMTOPP TT30	Inteplast Group	PP, Unspecified	AMTOPP
Chemlon® 133 GHL	Teknor Apex Company (Chem Polymer)	Nylon 66	Chemlon®
Leona™ 90G50	Asahi Kasei Chemicals Corporation	Nylon 66	Leona™
Lion Idemitsu Composites PPS G531F3	Lion Idemitsu Composites Co., Ltd.	PPS	Lion Idemitsu Composites PPS