Order Products : sales@su-jiao.com
ICORENE® N2103
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vp87mB_ICORENE-N2103.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® N2103 is a low density polyethylene resin suitable for general purposes. It is characterized by good toughness, stiffness and processability. It is succesfully used for domestic houseware or food containers. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 46 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 120 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 93.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 111 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GF 20 T 10 FRG 5 | Plastcom | Nylon, Unspecified | SLOVAMID® 6 |
| Ultramid® A3W | BASF Corporation | Nylon 66 | Ultramid® |
| Fixmaster Stainless Steel Putty | Loctite® | Epoxy | Fixmaster |
| Polifil® Nylon 627LP | The Plastics Group | Nylon 66 | Polifil® Nylon |
| Sylvin 8332-90 Grey 9323 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
