Order Products : sales@su-jiao.com
Armlen® PP TM 15-1AP
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Poly Plastic |
| Trademark: | Armlen® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | voSoqU_Armlen-PP-TM-15-1AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Armlen® PP TM 15-1AP is a Polypropylene product. It is available in Europe. |
| General Information |
|---|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.30 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.7 | g/10 min | |
| Molding Shrinkage | 0.70 to 0.90 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (Yield) | 23.0 | MPa | |
| Flexural Modulus (23°C) | 2000 | MPa | |
| Flexural Stress | 30.0 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Unnotched Impact Strength | |||
| -40°C | 20 | kJ/m² | |
| 20°C | 50 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 105 | °C | |
| 1.8 MPa, Unannealed | 55.0 | °C | |
| Melting Temperature | 162 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity 1 | 1.0E+15 | ohms | |
| Volume Resistivity 2 | 1.0E+17 | ohms·cm | |
| Electric Strength 3 | 36 | kV/mm |
| Flammability | Nominal Value | Unit | |
|---|---|---|---|
| Glow Wire Ignition Temperature | 960 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Burn Resistant Category | PX-0 | ||
| Trekingostoykost (KIT) | 14000 | mm |
| Note Message | |
|---|---|
| 1 . | Dry |
| 2 . | Dry |
| 3 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starglas CF006 | Eurostar Engineering Plastics | TES | Starglas |
| TIPPLEN® K 499 | MOL Petrochemicals Co. Ltd. | PP Impact Copolymer | TIPPLEN® |
| AEI SX739:CM488-6 | AEI Compounds Limited | HDPE | AEI |
| EPO-TEK® ED1021 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Dryflex® SE 80A301N U | ELASTO | SEBS | Dryflex® |
