Order Products : sales@su-jiao.com

NuSil MED20-2955

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vllXET_NuSil-MED20-2955.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts. LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.

LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.

General Information
Filler / Reinforcement	Silica
Features	Fast Cure Good Colorability High Strength Thermally Conductive
Uses	Gaskets Medical/Healthcare Applications Overmolding Seals Valves/Valve Parts
Agency Ratings	USP Class VI
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Thermal	Nominal Value	Unit
Thermal Conductivity	0.63	W/m/K

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 20
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Extrusion Rate	140	g/min

Uncured Properties	Nominal Value	Unit
Curing Time (150°C)	0.50	hr
Pot Life (25°C)	150	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	60
Tensile Strength	2.93	MPa
Tensile Elongation at Break	200	%
Tear Strength	10.5	kN/m

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SIF4569	Teknor Apex Asia Pacific PTE. LTD.	PVC, Flexible	Sinvicomp
SMOKEGUARD™ O 404 NATURAL	AlphaGary	Polyolefin, Unspecified	SMOKEGUARD™ O
UBE Nylon 5033 FDX27	UBE Engineering Plastics, S.A.	Nylon 66/6	UBE Nylon
CENUSIL® R 150	Wacker Chemie AG	Silicone	CENUSIL®
Durolon® G2530	Unigel Plásticos	PC	Durolon®