Order Products : sales@su-jiao.com
UBE Polyethylene V106
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vhG795_UBE-Polyethylene-V106.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBE Polyethylene V106 is a Polyethylene material. It is available in North America. Primary attribute of UBE Polyethylene V106: Good Toughness. Typical application of UBE Polyethylene V106: Engineering/Industrial Parts |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 0.40 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 6.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 96 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 22.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 750 | % | ASTM D638 |
| Apparent Bending Modulus | 110 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 88.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadraflex™ ALE-93A-B20 | Biomerics, LLC | TPU-Polyether | Quadraflex™ |
| Sindustris PC GP5057F | Sincerity Australia Pty Ltd. | PC+ABS | Sindustris PC |
| WELLAMID Nylon 6000 GVZ 45 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
| Hifax CA 7378 A | LyondellBasell Industries | TPO (POE) | Hifax |
| OxyShield® 2545 | Honeywell | Nylon 6 | OxyShield® |
