Order Products : sales@su-jiao.com
SMOKEGUARD™ O 301 NATURAL
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | AlphaGary |
| Trademark: | SMOKEGUARD™ O |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vgGCY4_SMOKEGUARD-O-301-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SMOKEGUARD O-301 IS A PLENUM CABLE INSULATION SKIN COMPOUND. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 - 1.27 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 54 - 60 | ASTM D2240 | |
| Shaw D, 15 seconds | 44 - 50 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 17.2 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 500 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -25.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 23°C, 1 MHz | 2.65 | ASTM D150 | |
| 23°C, 100 MHz | 2.82 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 23°C, 1 MHz | 9.0E-4 | ASTM D150 | |
| 23°C, 100 MHz | 1.0E-4 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 30 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 2.0 | hr | |
| Cylinder Zone 1 Temp. | 193 | °C | |
| Cylinder Zone 2 Temp. | 193 | °C | |
| Cylinder Zone 3 Temp. | 199 | °C | |
| Cylinder Zone 4 Temp. | 199 | °C | |
| Adapter Temperature | 204 | °C | |
| Melt Temperature | 204 - 210 | °C | |
| Die Temperature | 204 | °C |
| Extrusion instructions |
|---|
| Screw Design: General purpose screwScreen Pack: 40/60/40 or 40/80/40 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Siloxane Masterbatch MB25-302 | Multibase, A Dow Corning Company | Siloxane, UHMW | Siloxane Masterbatch |
| Veradel® 3320GF | Solvay Specialty Polymers | PESU | Veradel® |
| Xuchuan 2005L/B-8005 | Xuchuan Chemical (Suzhou) Co., Ltd | TPU-Polyester | Xuchuan |
| NatureFlex™ NM (23µ) | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| Evolue™ SO2530S | Prime Polymer Co., Ltd. | LLDPE | Evolue™ |
