Order Products : sales@su-jiao.com
Hypro® PP-CP 0.5/10
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Entec Polymers |
| Trademark: | Hypro® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vbE7BX_Hypro-PP-CP-0-5-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This is a high impact copolymer intended for use in blow molding, pipe, tubing, sheet and other extrusion applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 28.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 1(23°C) | 1350 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 88.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rulon® J | Saint Gobain Performance Plastics | PTFE | Rulon® |
| BP RPP 2012 T BLK | Buckeye Polymers, Inc. | PP Homopolymer | BP |
| Filter-bond™ R-37-38 | Hapco Inc. | TS, Unspecified | Filter-bond™ |
| PETOPLEN MH 220N | PETKIM Petrokimya Holding A.S. | PP, Unspecified | PETOPLEN |
| POLYfill PPHC TS15020 | Polykemi AB | PP, Unspecified | POLYfill |
