Order Products : sales@su-jiao.com
Andur 9002 APTF
| Category: | PUR-TDI , Polyurethane (TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vbCqy1_Andur-9002-APTF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Andur 9002-APTF is a low viscosity liquid prepolymer which can be processed and cured at room temperature with Curene 107 using Oleic acid catalyst to yield an elastomer with a hardness of 88 to 90 Shore A. This system has been specifically formulated to yield a tack-free film in about 60 minutes when catalyzed to a 6 to 8 minute pot life. Andur 9002-APTF is recommended where room temperature processing and curing is desired and a tack-free film within about 60 minutes. If an application does not require a tack-free film, then we recommend using Andur RT 9002 AP. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity (20°C) | 2400 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 5.6 to 6%Specific Gravity, ASTM D792, 70°F: 1.02 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AMPLIFY™ IO 3702 | The Dow Chemical Company | Ionomer | AMPLIFY™ IO |
| Celcon® GC20 | Celanese Corporation | Acetal (POM) Copolymer | Celcon® |
| Celstran® PA66-GF50-02 P7/12 | Celanese Corporation | Nylon 66 | Celstran® |
| Fainplast PVC GS 55 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Kynar® 720 Black | Arkema | PVDF | Kynar® |
