Order Products : sales@su-jiao.com

Nylene® 321 HS

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vYUgHz_Nylene-321-HS.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Impact modified, heat stabilized nylon 6 injection molding resin.

Inherent heat and chemical resistance typical of nylon 6 resins, while having higher toughness for uses where some impact may occur during service

Suitable for such applications as clips, fasteners, safety restraint components, and uses which require higher toughness and flexibility

General Information
Additive	Heat Stabilizer Impact Modifier
Features	Good Chemical Resistance Good Flexibility Heat Stabilized High Heat Resistance Impact Modified Ultra High Toughness
Uses	Fasteners

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.11	g/cm³	ASTM D792
Molding Shrinkage - Flow	1.2	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	55.2	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	100	%	ASTM D638
Flexural Modulus (23°C)	1930	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	190	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	53.9	°C	ASTM D648
Peak Melting Temperature	216	°C	ASTM D3418

Resin Grade	Manufacturer	Category	Trademark
RTP 800 GB 30 TFE 10	RTP Company	Acetal (POM) Copolymer	RTP
Grilamid® LV-30H FWA nat	EMS-GRIVORY	Nylon 12	Grilamid®
HiFill® PA4/6 GF5 HS BK002	Techmer Engineered Solutions	Nylon 46	HiFill®
EnviroPro 2010TF40	West Michigan Compounding	PP Copolymer	EnviroPro
tivilon® M 50 Dx 1	API SpA	TPV	tivilon®