Order Products : sales@su-jiao.com

Safron® H712-52RNM

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Safripol (PTY) LTD
Trademark:	Safron®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vXuzIS_Safron-H712-52RNM.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Safron® H712-52RNM Polypropylene Resin is a nucleated homopolymer for thin wall, high speed injection moulding combining a good balance of physical properties with easy processability. It is produced by controlled rheology, has a narrow molecular weight distribution and produces parts with minimal distortion.

Safron® H712-52RNM Polypropylene Resin is also suitable for extrusion coating and lamination.

General Information
Additive	Nucleating agent
Features	Nucleated Low warpage Homopolymer Workability, good Controlled rheology Fast molding cycle Compliance of Food Exposure Narrow molecular weight distribution
Uses	Cosmetic Packaging Thin wall packaging Laminate Electrical appliances Shield Household goods Business equipment Coating application Shell Stationery
Agency Ratings	FDA 21 CFR 177.1520(c) 1.1a Europe 10/1/2011 12:00:00 AM
Processing Method	Lamination method Extrusion coating Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	50	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)	32.0	MPa	ISO 527-2
Tensile Strain (Yield, Injection Molded)	8.5	%	ISO 527-2
Flexural Modulus (Injection Molded)	1500	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C, Injection Molded)	2.3	kJ/m²	ISO 179/1eA

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature ¹
0.45 MPa, not annealed	100	°C	ISO 75-2/B
1.8 MPa, not annealed	55.0	°C	ISO 75-2/A
Vicat Softening Temperature ²	84.0	°C	ISO 306/B

Injection	Nominal Value	Unit
Rear Temperature	190	°C
Middle Temperature	220 - 240	°C
Front Temperature	220 - 260	°C
Nozzle Temperature	240	°C

Injection instructions
Zone 4 Temperature: 260°C

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	180 - 200	°C
Cylinder Zone 2 Temp.	200 - 250	°C
Cylinder Zone 3 Temp.	250 - 270	°C
Cylinder Zone 4 Temp.	270	°C
Die Temperature	220 - 240	°C

Note Message
1 .	Injection Molded
2 .	Injection Molded

Resin Grade	Manufacturer	Category	Trademark
RTP 2287 HF	RTP Company	PEEK	RTP
RTP 4282 TFE 10	RTP Company	PI, TP	RTP
Sylvin 6405-90 NATURAL	Sylvin Technologies Incorporated	PVC+PUR	Sylvin
LEXAN™ EXL1443T resin	SABIC Innovative Plastics	PC	LEXAN™
Pinnacle PP 1355Z	Pinnacle Polymers	PP Homopolymer	Pinnacle PP