Order Products : sales@su-jiao.com
Vyncolit® SI 9041
| Category: | Silicone , Silicone |
| Manufacturer: | Vyncolit N.V. |
| Trademark: | Vyncolit® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vWerXi_Vyncolit-SI-9041.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vyncolit SI 9041 is a silicone (Silicone) material containing long glass fiber. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is: resin transfer molding or compression molding. The main characteristics of Vyncolit SI 9041 are: impact resistance. Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.30 | g/cm³ | ASTM D792 |
| Bulk Factor | 7.0 | ASTM D1895 | |
| Molding Shrinkage - Flow (Compression Molded) | 0.010 - 0.10 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.15 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 27.6 | MPa | ASTM D638 |
| Flexural Modulus | 13800 | MPa | ASTM D790 |
| Flexural Strength | 68.9 | MPa | ASTM D790 |
| Compressive Strength | 75.8 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 270 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 288 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | ASTM D149 | ||
| -- 1 | 5.9 | kV/mm | ASTM D149 |
| -- 2 | 3.9 | kV/mm | ASTM D149 |
| Arc Resistance | 210 | sec | ASTM D495 |
| Additional Information |
|---|
| Water Absorption, ASTM D570, 48 hrs, 50°C: 0.4%Dielectric Strength, ASTM D149, 60 Hz, Method A, wet: 150 V/milDielectric Strength, ASTM D149, 60 Hz, Method B, wet: 100 V/milBulk Factor, ASTM D1895: 6 to 8Compression and Transfer Molding Conditions: Preheat Temperature: 150 to 180 °F Mold Temperature: 280 to 300 °F Compression Mold Pressure: 2000 to 6000 psi Transfer Mold Pressure: 4000 to 8000 psi Cure Time, 0.125 in: 300 sec |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| 2 . | Method B (step by step) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYFORT® FPP 30 T SHH REC | A. Schulman Europe | PP Homopolymer | POLYFORT® |
| Sindustris PBT HI2304 | Sincerity Australia Pty Ltd. | PC+PBT | Sindustris PBT |
| Diamond ABS 7501 | Network Polymers, Inc. | ABS | Diamond ABS |
| elitel UE3231 | UNITIKA Plastics Division | TPC-ET | elitel |
| LEXAN™ 244R resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
