Order Products : sales@su-jiao.com

Braskem PP H7058-25R

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Braskem Europe GmbH
Trademark:	Braskem PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vVtYdE_Braskem-PP-H7058-25R.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Braskem H7058-25R Polypropylene Resin is a homopolymer developed especially for thin wall injection moulding. Braskem H7058-25R Polypropylene Resin is an easy flow, general purpose homopolymer with a good balance of physical properties. Applications for Braskem H7058-25R Polypropylene Resin Thin wall containers Household articles Packaging Toys Regulatory Information Braskem H7058-25R Polypropylene Resin should comply with: EU, No 10/2011 The appropriate regulations should be consulted for more detailed information.

Message

Braskem H7058-25R Polypropylene Resin is a homopolymer developed especially for thin wall injection moulding. Braskem H7058-25R Polypropylene Resin is an easy flow, general purpose homopolymer with a good balance of physical properties.

Applications for Braskem H7058-25R Polypropylene Resin

Thin wall containers

Household articles

Packaging

Toys

Regulatory Information
Braskem H7058-25R Polypropylene Resin should comply with:

EU, No 10/2011

The appropriate regulations should be consulted for more detailed information.

General Information
Agency Ratings	EU No 10/2011
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	25	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)	33.0	MPa	ISO 527-2
Tensile Strain (Yield, Injection Molded)	10	%	ISO 527-2
Flexural Modulus (Injection Molded)	1400	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C, Injection Molded)	3.0	kJ/m²	ISO 179/1eA

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature ¹(0.45 MPa, Unannealed)	80.0	°C	ISO 75-2/B
Vicat Softening Temperature ²	150	°C	ISO 306/A

Note Message
1 .	Injection Molded
2 .	Injection Molded

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene HP519-00	RheTech, Inc.	PP Copolymer	RheTech Polypropylene
Mirakutoran® TPU XN-2001	Japan Mirakutoran Inc.	TPU Alloy	Mirakutoran® TPU
Haysite Plastics H1000	Haysite Reinforced Plastics	Polyester, TS	Haysite Plastics
PENTAMID B GV50 H schwarz	PENTAC Polymer GmbH	Nylon 6	PENTAMID B
3M™ Dyneon™ PTFE Compound FB 01N	3M Advanced Materials Division	PTFE	3M™ Dyneon™ PTFE Compound