Order Products : sales@su-jiao.com
Pier One PC PC12R-BK05
| Category: | PC , Polycarbonate |
| Manufacturer: | Pier One Polymers, Inc. |
| Trademark: | Pier One PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vTrt9g_Pier-One-PC-PC12R-BK05.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Pier One PC PC12R-BK05 is a Polycarbonate (PC) material. It is available in North America for injection molding. Important attributes of Pier One PC PC12R-BK05 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C, Injection Molded) | 62.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C, Injection Molded) | 120 | % | ASTM D638 |
| Flexural Modulus (23°C, Injection Molded) | 2200 | MPa | ASTM D790 |
| Flexural Strength (23°C, Injection Molded) | 90.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 750 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 135 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 LI TS | Plastcom | Nylon 66 | SLOVAMID® 66 |
| 4LOY® 25E27200 | 4Plas | PC+ABS | 4LOY® |
| HIPOL™ J600 | Mitsui Chemicals, Inc. | PP Homopolymer | HIPOL™ |
| ICORENE® N2106 | ICO Polymers EMEA, A Division of A. Schulman | LDPE | ICORENE® |
| Alathon® L5645 | LyondellBasell Industries | HDPE | Alathon® |
