Order Products : sales@su-jiao.com
En Chuan 6011WAL
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vSXvLG_En-Chuan-6011WAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 6011WAL Similar to 6010WAL, is designed for the use of casting of imitated artistic items. It contains wax and transparent accelerator. Because of its high reaction in curing and good rigid characteristic, it is most suitable for the casting of smaller items and medium item. Alone the 6011WAL use, most is suitable for the middle and small imitated artistic items. For example manufacture of hair pin and so on. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 35 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 3650 | MPa | ASTM D790 |
| Flexural Strength | 115 | MPa | ASTM D790 |
| Additional Information |
|---|
| Transparent Accelerator, Co-oct (Co 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.11 - 1.13 | g/cm³ | |
| Viscosity (25°C) | 0.20 - 0.40 | Pa·s | |
| Gel Time (25°C) | 2.5 - 6.0 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 60.8 | MPa | |
| Tensile Elongation at Break | 2.0 | % |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren M800EA (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Random Copolymer | Sanren |
| Moplen HP532J | LyondellBasell Industries | PP Homopolymer | Moplen |
| WELLAMID Nylon 6600 GV 35 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| Epocast 35-A/927 | Huntsman Advanced Materials | Epoxy | Epocast |
| CYCOLAC™ DL100LG resin | SABIC Innovative Plastics Europe | ABS | CYCOLAC™ |
