Order Products : sales@su-jiao.com
Acculam™ Epoxyglas G10 nonFR
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Accurate Plastics, Inc. |
| Trademark: | Acculam™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vRiSYr_Acculam-Epoxyglas-G10-nonFR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Acculam® Epoxyglas G10 nonFR - Laminate sheet comprised of a halogen free epoxy resin binder and a woven fiberglass substrate. It qualifies to NEMA G10 and MIL-I-24768/2. This material exhibits high mechanical strength and electrical insulating qualities under both dry and humid conditions. Its ease of fabrication allows its use in many structural and cryogenic applications where halogenated compounds may be undesirable. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.85 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr, 3.18 mm) | < 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength | ASTM D790 | ||
| 3.18 mm 1 | > 345 | MPa | |
| 3.18 mm 2 | > 448 | MPa | |
| Compressive Strength 3 | > 414 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- 4 | > 430 | J/m | |
| -- 5 | > 530 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Temperature Index | 140 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Breakdown | |||
| -- 6 | > 50000 | V | |
| A | > 50000 | V |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bond Strength | > 1.0E+6 | g |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Relative Permittivity 7 | 4.80 | IEC 60250 | |
| Dissipation Factor | ASTM D150 | ||
| -- 8 | 0.018 | ||
| -- 9 | 0.017 |
| Note Message | |
|---|---|
| 1 . | CW-A |
| 2 . | LW-A |
| 3 . | Flatwise |
| 4 . | CW |
| 5 . | LW |
| 6 . | D48/50 |
| 7 . | D24/23 |
| 8 . | D24/23 |
| 9 . | A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MALAT 37W300 | AD majoris | PBT | MALAT |
| Vistek 3030 | Visual Polymer Technologies, LLC | TP, Unspecified | Vistek |
| CALIBRE™ 201-18 | Trinseo | PC | CALIBRE™ |
| HANWHA LDPE 5321 (Film) | Hanwha Chemical | LDPE | HANWHA LDPE |
| HiFill® POM CO GF5 CC | Techmer Engineered Solutions | Acetal (POM) Copolymer | HiFill® |
