Order Products : sales@su-jiao.com
POLYfill PPC B10075
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Polykemi AB |
| Trademark: | POLYfill |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vQfukM_POLYfill-PPC-B10075.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Mineral reinforced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.25 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 17.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 5.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 3000 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 150 | °C | ISO 306/A50 |
| -- | 87.0 | °C | ISO 306/B50 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Ignition Temperature (2.00 mm) | 750 | °C | IEC 60695-2-13 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Daplen™ EE168AI | Borealis AG | PP, Unspecified | Daplen™ |
| Durethan® AKV 30 GIT H2.0 900116 | LANXESS GmbH | Nylon 66 | Durethan® |
| INEOS Wire & Cable BPD8167 | INEOS Olefins & Polymers Europe | PE, Unspecified | INEOS Wire & Cable |
| ICORENE® 9005 | ICO Polymers EMEA, A Division of A. Schulman | Nylon 12 | ICORENE® |
| LNP™ LUBRICOMP™ RL003 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
