Tecnoflon® PL 455

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vQYAVx_Tecnoflon-PL-455.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® PL 455 is a new generation low temperature peroxide curable low viscosity fluoroelastomer with 64% wt fluorine content. Tecnoflon® PL 455 exhibits excellent low temperature flexibility (TR10 = -30°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles. Some of the basic properties of Tecnoflon® PL 455 are: Excellent low temperature flexibility Low post cure Superior mold flow Lack of mold fouling Excellent mold release Tecnoflon® PL 455 can be used for injection, injection-compression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 455 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

Message

TECNOFLON® PL 455 is a new generation low temperature peroxide curable low viscosity fluoroelastomer with 64% wt fluorine content. Tecnoflon® PL 455 exhibits excellent low temperature flexibility (TR10 = -30°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles.

Some of the basic properties of Tecnoflon® PL 455 are:

Excellent low temperature flexibility

Low post cure

Superior mold flow

Lack of mold fouling

Excellent mold release

Tecnoflon® PL 455 can be used for injection, injection-compression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 455 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

General Information
Features	Fast Cure Good Flow Good Mold Release Good Processability Low Temperature Flexibility Low Viscosity
Uses	Belts/Belt Repair Blending Gaskets Hose Low Temperature Applications Profiles Seals Sheet
Appearance	Translucent
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	19	MU
Fluorine Content ²	64	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Matrixx 54S7102	The Matrixx Group, Inc.	PC	Matrixx
Ravago Compounds HMP-366	Ravago Manufacturing Americas, LLC	EVA	Ravago Compounds
SABIC® LDPE 1808P500	Saudi Basic Industries Corporation (SABIC)	LDPE	SABIC® LDPE
HiFill® POM HO GF40	Techmer Engineered Solutions	Acetal (POM) Homopolymer	HiFill®
TOLEN H033 FF/3	SIBUR	PP Homopolymer	TOLEN