Order Products : sales@su-jiao.com
Cosmic Epoxy EH31
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vQGdPY_Cosmic-Epoxy-EH31.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic EH31 is an iron filled epoxy molding compound which is supplied in a granular form. FEATURES This material flows easily under low pressure and provides good moldability. APPLICATIONS The material is good for EMI / RFI shielding, and can be either compression or transfer molded to fabricate core rods and to encapsulate surface mount and axial leaded inductors. This single molded compound eliminates the labor intensive over-under molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 2.49 | g/cm³ | |
| Bulk Factor | 2.5 | ||
| Spiral Flow | 20.0 - 30.0 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (5°C) | 17 | wk | |
| Post Cure Time (160°C) | 2.0 - 4.0 | hr |
| Additional Information |
|---|
| Inductance Ls (µH) : 0.1924Quality Factor : 2.9 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 130 - 180 | °C | |
| Injection Pressure | 0.345 - 5.52 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PH 91 GF 15 | Plastcom | PP, Unspecified | SLOVALEN® |
| Xuchuan XCW-8130 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Braskem PE BF-2021 | Braskem | LDPE | Braskem PE |
| CERTENE™ PBS-4AN | Muehlstein | PP Impact Copolymer | CERTENE™ |
| Ebalta MG 709-9 / Comp. A+B | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
