Order Products : sales@su-jiao.com
DJSilicone NE-8141
| Category: | Silicone , Silicone |
| Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
| Trademark: | DJSilicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vP3OoB_DJSilicone-NE-8141.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| With better tensile strength, elongation and tear strength than common and general silion rubber, high-strength silicone rubber for molding is suitable for molding products with higher mechanical property requirements. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.08 to 1.18 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 38 to 42 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | < 7 | % | ASTM D412 |
| Tensile Strength (Yield) | > 7.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 550 | % | ASTM D412 |
| Tear Strength | > 20.0 | kN/m | ASTM D624 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Carbotex KV-30FD | Kotec Corporation | PC | Carbotex |
| HANWHA 3081 | Hanwha Chemical | HDPE | HANWHA |
| Kumho ABS BM-530 | Korea Kumho Petrochemical Co., Ltd. | ABS | Kumho ABS |
| Isocor™ CU145SI | Shakespeare Monofilaments and Specialty Polymers | Nylon 66/6 | Isocor™ |
| PETILEN S 65/R68 | PETKIM Petrokimya Holding A.S. | PVC, Rigid | PETILEN |
