Order Products : sales@su-jiao.com
Generic TPU-Capro
| Category: | TPU-Capro , Thermoplastic Polyurethane Elastomer (Polycaprolactone) |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vImx3u_Generic-TPU-Capro.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic TPU-Capro This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.16 - 1.20 | g/cm³ | ASTM D792 |
| 23°C | 1.19 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (170°C/2.16 kg) | 23 - 84 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| 23°C | 45 - 98 | ASTM D2240 | |
| 23°C | 44 - 98 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| 100% strain, 23°C | 5.75 - 13.5 | MPa | ASTM D412 |
| 100% strain, 23°C | 5.75 - 12.4 | MPa | ISO 37 |
| 300% strain, 23°C | 7.34 - 31.6 | MPa | ASTM D412 |
| 300% strain, 23°C | 4.00 - 31.0 | MPa | ISO 37 |
| Tensile Strength (Yield, 23°C) | 34.3 - 42.5 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation | |||
| Fracture, 23°C | 480 - 630 | % | ASTM D412 |
| Fracture, 23°C | 440 - 750 | % | ISO 37 |
| Tear Strength | |||
| 23°C | 88.7 - 170 | kN/m | ASTM D624 |
| 23°C | 86 - 170 | kN/m | ISO 34-1 |
| Compression Set | 13 - 43 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -47.0 - -23.0 | °C | DSC |
| Melting Temperature | 59.0 - 204 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 105 | °C | |
| Drying Time | 1.5 - 4.0 | hr | |
| Rear Temperature | 190 - 210 | °C | |
| Middle Temperature | 195 - 215 | °C | |
| Front Temperature | 205 - 226 | °C | |
| Nozzle Temperature | 210 - 225 | °C | |
| Mold Temperature | 35.0 - 35.5 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic TPU-CaproThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® A T BK | Ravago Group | Nylon 66 | Ravamid® |
| Sylvin 8200-60 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Wondel® S SR0G4 | Nanjing Julong Engineering Plastics Co., LTD | ABS | Wondel® S |
| Yanshan PE 5200B | SINOPEC Beijing Yanshan Petrochemical | HDPE | Yanshan PE |
| LUVOCOM® 80/TF/22/NT | Lehmann & Voss & Co. | Acetal (POM) Copolymer | LUVOCOM® |
