Order Products : sales@su-jiao.com

Formolene® 5140N

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Formosa Plastics Corporation, U.S.A.
Trademark:	Formolene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vHfP3Y_Formolene-5140N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Formolene 5140N is a highly isotactic, polypropylene homopolymer with fast cycle time and improved mold release. It has use in injection molded applications including closures and thin wall container programs. It contains a unique combination of stabilizers and additives, including elevated levels of antistat which provides excellent processability and good end use performance. Formolene 5140N meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact.

Message

Formolene 5140N is a highly isotactic, polypropylene homopolymer with fast cycle time and improved mold release. It has use in injection molded applications including closures and thin wall container programs. It contains a unique combination of stabilizers and additives, including elevated levels of antistat which provides excellent processability and good end use performance.

Formolene 5140N meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact.

General Information
Additive	Antistatic Unspecified Additive Unspecified Stabilizer
Features	Antistatic Fast Molding Cycle Food Contact Acceptable Good Mold Release Good Processability High Isotactic Homopolymer
Uses	Closures Thin-walled Containers
Agency Ratings	EC 1907/2006 (REACH) FDA 21 CFR 177.1520
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	12	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	33.1	MPa	ASTM D638
Tensile Elongation ²(Yield)	9.0	%	ASTM D638
Flexural Modulus - 1% Secant ³	1380	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	32	J/m	ASTM D256

Note Message
1 .	50 mm/min
2 .	50 mm/min
3 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
Mirakutoran® TPU E 398	Japan Mirakutoran Inc.	TPU Alloy	Mirakutoran® TPU
Multiuse Leostomer® LE-3190N	Riken Technos Corp.	TPU, Unspecified	Multiuse Leostomer®
Celstran® PA6-GF50-01	Celanese Corporation	Nylon 6	Celstran®
Diaterm® B26 GF30V0	DTR S.r.l. (Develop Thermoplastic Resins)	Nylon 66	Diaterm®
Electrafil® J-1/CF/10/TF/13/SI/2	Techmer Engineered Solutions	Nylon 66	Electrafil®