Order Products : sales@su-jiao.com

Premi-Glas® 1200H-15

Category:	TS, Unspecified , Thermoset, Unspecified
Manufacturer:	Premix, Inc.
Trademark:	Premi-Glas®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vGCwOr_Premi-Glas-1200H-15.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Premi-Glas® 1200H-15 is a fiberglass reinforced thermoset sheet molding compound for general purpose applications requiring thermal stability and stiffness.

Key Features and Benefits:

Good dimensional stability, including excellent thermal resistance.

Pigmentable for molded-in color; best appearance with mold texture.

Excellent property retention in cold and hot environments.

Suitable for outdoor use in applications involving UV exposure and water immersion in accordance with UL746C (f1), see File E42524

General Information
Filler / Reinforcement	Glass Fiber
Features	Good Corrosion Resistance Good Dimensional Stability Good Thermal Stability High Stiffness
Uses	General Purpose Outdoor Applications
UL File Number	E42524
Forms	SMC - Sheet Molding Compound

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.70 to 1.85	g/cm³
Molding Shrinkage - Flow	0.15 to 0.25	%
Outdoor Suitability	f1		UL 746C

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Compression Molded)	11700	MPa	ASTM D638
Tensile Strength (Compression Molded)	34.5	MPa	ASTM D638
Flexural Modulus (Compression Molded)	9650	MPa	ASTM D790
Flexural Strength (Compression Molded)	96.5	MPa	ASTM D790
Compressive Strength ¹	145	MPa	ASTM D695
Poisson's Ratio	0.30

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (Compression Molded)	430	J/m	ASTM D256
Unnotched Izod Impact (Compression Molded)	590	J/m	ASTM D4812

Thermal	Nominal Value	Unit	Test Method
CLTE
Flow ²	2.5E-5	cm/cm/°C
Transverse ³	3.5E-5	cm/cm/°C
Thermal Conductivity	0.30	W/m/K	ASTM C177
RTI Elec	130	°C	UL 746
RTI Imp	130	°C	UL 746
RTI Str	130	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength	15	kV/mm	ASTM D149
Arc Resistance	180	sec	ASTM D495

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.52 mm)	HB		UL 94

Injection	Nominal Value	Unit
Mold Temperature	149	°C
Injection Pressure	3.45 to 6.89	MPa

Note Message
1 .	Compression Molded
2 .	XY Direction
3 .	Z Direction

Resin Grade	Manufacturer	Category	Trademark
RTP 885 TFE 13 SI 2	RTP Company	Acetal (POM) Copolymer	RTP
ALCOM® PA66 910/30.1 GF15 TCE5	ALBIS PLASTIC GmbH	Nylon 66	ALCOM® PA66
ALTECH® PP-B A 2015/550 GF15 CP	ALBIS PLASTIC GmbH	PP Copolymer	ALTECH® PP-B
INEOS HDPE G50-100	INEOS Olefins & Polymers USA	HDPE Copolymer	INEOS HDPE
Lupoy® 1201-18	LG Chem Ltd.	PC	Lupoy®