Order Products : sales@su-jiao.com
CERTENE™ HPB-0760
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vF526V_CERTENEHPB0760.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HPB-0760 is a certified prime Phillips Process designed for BLOW MOLDING of containers for packaging of non-aggressive chemicals. HPB-0760 features low to medium swell, easy processability in conventional continuous extrusion equipment, good ESCR, good Impact strength, high Stiffness, improved Barrier, and low Odor and Taste. HPB-0760 applications include small to medium size thin wall bottle for milk, water and juices, wide mouth containers for body powders, and extrusion of sheet and profiles. HPB-0760 processing temperature is 140 to 165°C., with mold 10 to 30°C. HPB-0760 complies with FDA regulation 21CFR 177.1520 (c) 3.1(a) + 3.2(a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, Compression Molded, F50) | 15.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 710 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 1450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (Compression Molded) | 189 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 10.0 - 30.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 140 - 165 | °C |
| Note Message | |
|---|---|
| 1 . | Notched bent strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAXATEC™ 4307 | SAX Polymers | ASA | SAXATEC™ |
| SUMIKASUPER® LCP E4008L | Sumitomo Chemical Co., Ltd. | LCP | SUMIKASUPER® LCP |
| Witcom PA6 EC-HI | Witcom Engineering Plastics B.V. | Nylon 6 | Witcom PA6 |
| Ferro PP TPP20AN17BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| Eco-Solutions GP315-1 | MINIMA Technoloy Co. Ltd. | Biodeg Polymers | Eco-Solutions |
