Category: | LDPE , Low Density Polyethylene |
Manufacturer: | INEOS Olefins & Polymers Europe |
Trademark: | INEOS Wire & Cable |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | vDQ7FV_INEOS-Wire-Cable-BPD2142.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
BPD 2142 is an unstabilised low density polyethylene. This material, when compounded with suitable additives, is designed for use in silane crosslinking processes. Its melt flow rate allows it to be processed with the two main silane technologies: Monosil (one-step process) and Sioplas (two-step process). It has been developed for insulation of power cables up to 5 kV. |
General Information | |
---|---|
Features |
|
Uses |
|
Agency Ratings |
|
RoHS Compliance |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.930 | g/cm³ | ISO 1183/D |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ISO 1133 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress (Break) | 17.0 | MPa | IEC 60811-1-1 |
Tensile Strain (Break) | 350 | % | IEC 60811-1-1 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Heat Elongation 1(200°C) | 60 | % | IEC 60811-2-1 |
Additional Information |
---|
BPD 2142 when grafted in the laboratory with 1.5% of a suitable silane/peroxide mixture and with subsequent addition of a tin condensation catalyst, typically gives these results on a 1.5mm thick tape after curing overnight in water at 80°C. |
Note Message | |
---|---|
1 . | 15 min, 20 N/cm² |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Shuman PC 920 | Shuman Plastics, Inc. | PC | Shuman PC |
Capran® 75 | Honeywell | Nylon 6 | Capran® |
Lucofin® 1455MB | Lucobit AG | Polyolefin, Unspecified | Lucofin® |
Elastollan® 1195 A 10 FC | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
Sylvin 9077-60 Red 604 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |