Order Products : sales@su-jiao.com
Resinol LDPE Type A
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Spartech Plastics |
| Trademark: | RESINOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | v3g4g7_Resinol-LDPE-Type-A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Resinol LDPE Type A is a low density polyethylene product,. It is available in North America. Typical application areas are: packaging. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.915 | g/cm³ | ASTM D792 |
| Environmental Stress-Cracking Resistance | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 44 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 55.2 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 9.65 | MPa | ASTM D638 |
| -- | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 150 | % | ASTM D638 |
| Compressive Strength | 1.93 | MPa | ASTM D695 |
| Deformation Under Load (50°C, 14 MPa) | 0.620 | % | ASTM D621 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 850 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 43.3 | °C | ASTM D648 |
| Brittleness Temperature | -118 | °C | ASTM D746 |
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| CLTE - Flow | 1.8E-4 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 6.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (3.18 mm) | 20 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 100 kHz | 2.28 | ASTM D150 | |
| 1 MHz | 2.28 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 100 kHz | 1.0E-4 | ASTM D150 | |
| 1 MHz | 1.0E-4 | ASTM D150 |
| Additional Information |
|---|
| Density, ASTM D1505: 0.91 to 0.925g/ccTensile Strength, ASTM 638, 20in/min: 1400 to 2200psiTensile Strength, ASTM 638, 2in/min: 1000 to 1900psiNotched Izod Impact Strength, ASTM D256: >16ft-lb/inBrittleness Temperature, ASTM D746: <-180°F (-118°C)Hardness, Shore D: 44-48Modulus of Elasticity, ASTM D638: 8000 to 25000 psiCompressive Stress, ASTM D695: 280 to 600 psiDissipation Factor, ASTM D1513, 100000: < 0.0001Dissipation Factor, ASTM D1513, 1000000: < 0.0001 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMATOP PP CO 350-10 RC | Amco Polymers | PP Random Copolymer | PRIMATOP |
| Flexalloy® OR 9800-50 | Teknor Apex Company | PVC Elastomer | Flexalloy® |
| Geon™ Vinyl Rigid Molding M4810 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
| THERMOLAST® K TF3ADN (Series: FC/AD1/PS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Novalloy-E E10 | PlastxWorld Inc. | ABS | Novalloy-E |
