Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M5100
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | v0aEG4_GeonVinylRigidMoldingM5100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™Vinyl Rigid Molding M5100 is a rigid polyvinyl chloride product,. It is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Geon™Vinyl Rigid Molding M5100 applications include water pipes/pipes/drinking water and outdoor applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Spiral Flow | 55.9 | cm | |
| Molding Shrinkage - Flow | 0.20 - 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 81 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2960 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 50.3 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 25 | % | ASTM D638 |
| Flexural Modulus | 2760 | MPa | ASTM D790 |
| Flexural Strength | 82.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 0°C, 3.18mm, injection molding | 27 | J/m | ASTM D256A |
| 23°C, 3.18mm, injection molding | 110 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, unannealed, 6.35mm | 67.2 | °C | ASTM D648 |
| 1.8 MPa, annealed, 6.35mm | 72.2 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MIDILENA I LDPE B22/0.25 | ROMPETROL PETROCHEMICALS S.R.L. | LDPE | MIDILENA I |
| TABOREN PH 51 G 20 | SILON s.ro | PP Homopolymer | TABOREN |
| Grivory® HT2V-3X V0 nat 6059 | EMS-GRIVORY | Nylon 6T/66 | Grivory® |
| Sylvin 7833-60 Red 6285 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LEXAN™ HP2 resin | SABIC Innovative Plastics | PC | LEXAN™ |
