Order Products : sales@su-jiao.com
POLYelast TPE R44
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Polykemi AB |
| Trademark: | POLYelast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uzadsR_POLYelast-TPE-R44.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYelast TPE R44 is a Polypropylene + EPDM Rubber (PP+EPDM) product filled with 5.0% filler. It is available in Asia Pacific or Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1.3 to 1.5 | % | |
| Flow | 1.3 to 1.5 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 15.0 | MPa | ISO 527-2 |
| Flexural Modulus (23°C) | 700 | MPa | ISO 178 |
| Flexural Stress | 22.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 28 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 87.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 135 | °C | ISO 306/A50 |
| Note Message | |
|---|---|
| 1 . | 120°C/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unilex™ UP.500.935U | United Polychem | PE, Unspecified | Unilex™ |
| ALCOM® PC 740/4 GY1156-04LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Axiall PVC 10703 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| EPO-TEK® E3035T-2 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Latamid 66 E21 K/30 | LATI S.p.A. | Nylon 66 | Latamid |
