Order Products : sales@su-jiao.com
Generic PAS - Glass Fiber
| Category: | PAS , Polyarylsulfone |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uy3x2V_Generic-PAS---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PAS - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 - 1.59 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.10 - 0.61 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.20 - 0.41 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 4340 - 9140 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 95.7 - 124 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.0 - 3.6 | % | ASTM D638 |
| Flexural Modulus (23°C) | 4120 - 7720 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 144 - 173 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 59 - 81 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 480 - 540 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 204 - 213 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (23°C) | 16 - 17 | kV/mm | ASTM D149 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 352 - 371 | °C | |
| Middle Temperature | 363 - 371 | °C | |
| Front Temperature | 371 - 375 | °C | |
| Mold Temperature | 128 - 150 | °C | |
| Injection Pressure | 96.5 - 121 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PAS - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ ABS 1081 | TER HELL PLASTIC GMBH | ABS | TEREZ ABS |
| Witcom PBT 6G/3L1 | Witcom Engineering Plastics B.V. | PBT | Witcom PBT |
| Eraclene® BC 82 | Versalis S.p.A. | HDPE | Eraclene® |
| POCAN® B 3215 000000 | LANXESS GmbH | PBT | POCAN® |
| Hostacom TRC 333N D72714 | LyondellBasell Industries | PP Copolymer | Hostacom |
