Order Products : sales@su-jiao.com
Osterlene® PPC-35-1-C
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uwNnkI_Osterlene-PPC-35-1-C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PPC-35-1-C is a polypropylene-ethylene random copolymer designed for use in housewares, consumer products, and thin-wall injection molding applications. PPC-35-1-C is an excellent choice for outstanding clarity, toughness, faster cycle times and low warpage. PPC-35-1-C processes easily over a broad range of operating conditions. PPC-35-1-C meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 11 | % | ASTM D638 |
| Flexural Modulus | 1140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (-18°C) | 210 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Additional Information |
|---|
| The value shown as Unnotched Izod Impact, ASTM D256, was tested in accordance with ASTM D4812. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 232 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RONFALIN® C C130 GF20 | A. Schulman Europe | PC+ABS | RONFALIN® C |
| Sindustris PC GN1001FA | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Unilex™ UP.4400.952 | United Polychem | HDPE | Unilex™ |
| KRATON® D1183 B | Kraton Polymers LLC | SIS | KRATON® |
| LUVOCOM® 20-8368 | LEHVOSS Group | PPA | LUVOCOM® |
