Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion 87560
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uvClan_Geon-Vinyl-Rigid-Extrusion-87560.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™Vinyl Rigid Extrusion 87560 is a rigid polyvinyl chloride product,. It can be processed by sheet extrusion molding and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 12443 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2730 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 51.8 | MPa | ASTM D638 |
| Flexural Modulus | 2920 | MPa | ASTM D790 |
| Flexural Strength | 86.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| 23°C, 3.18mm, injection molding | 75 | J/m | ASTM D256A |
| Transverse flow : 23°C, 3.18mm, molded | 53 | J/m | ASTM D256A |
| Flow : 23°C, 3.18mm, molded | 85 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 60.1 | J/cm | ASTM D4226 |
| 23°C 4 | 199 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 65.0 | °C | ASTM D648 |
| Vicat Softening Temperature | |||
| -- | 82.2 | °C | ISO 306 5 |
| -- | 73.1 | °C | ISO 306 6 |
| CLTE - Flow | 7.2E-5 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| 注释：分档是采用注塑模制样品进行缺口摆锤冲击试验确定的。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 191 - 204 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| 5 . | 标准 B (120°C/h), 压 力1 (10N) |
| 6 . | 标准 B (120°C/h), 载荷2 (50N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 7842-75 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| BESTNYL SI30VI01A | Triesa Plastics | Nylon 6 | BESTNYL |
| Boda BDF-H2801 | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| Arlatex® 1495E | INSA | SBR, Emulsion | Arlatex® |
| ESTOPLAST EP 1085 E | Ester Industries Ltd. | PBT | ESTOPLAST EP |
