| Category: | SBR, Unspecified , Styrene Butadiene Rubber |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ut9H04_Generic-SBR-Unspecified.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic SBR, Unspecified This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 to 1.00 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 60 to 100 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 40 to 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 3.00 to 23.0 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 380 to 650 | % | ASTM D412 |
| Tear Strength (23°C) | 34.7 to 35.6 | kN/m | ASTM D624 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| tefabloc® TP SD 333 65A | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| NYLEM® 66 GFR 50 | EMAS Plastik San.Tic.AS. | Nylon 66 | NYLEM® |
| Celstran® PA66-GF50-0112P7,5/10 | Celanese Corporation | Nylon 66/6 | Celstran® |
| apilon 52® MA-7505 | API SpA | TPU-Polyester | apilon 52® |
| Cellasto® MH24-35 | BASF Polyurethanes GmbH | TPU, Unspecified | Cellasto® |